Installing And Connecting An Ex9214 Switch - Juniper EX9214 Hardware Manual

CAUTION: Register product serial numbers on the Juniper Networks website. Update
the installation base data if any addition or change to the installation base occurs or if
the installation base is moved. Juniper Networks is not responsible for not meeting the
hardware replacement service-level agreement for products that do not have registered
serial numbers or accurate installation base data.
Register your product(s) at
Update your installation base at
updateinstallbase.jsp.

Installing and Connecting an EX9214 Switch

The switch chassis is a rigid sheet-metal structure that houses the other hardware components such as
Switch Fabric modules (SF modules), Routing Engine modules (RE modules), line cards, power supplies,
fan trays, and air filter. The switch is shipped in a wooden crate. A wooden pallet forms the base of the
crate.
To unpack the switch, follow instructions in
You can install the switch in a 19-in. equipment rack or cabinet by using the front-mounting bracket
attached to the chassis. To install the switch in a rack or cabinet, follow the instructions in
EX9200 Switch on a Rack or Cabinet Using a Mechanical Lift" on page
To connect the switch to earth ground, follow instructions in
Switch
.
To connect power to the switch chassis, follow instructions in
Switch" on page 174 and
To connect and configure the switch, follow instructions in
Switch (CLI Procedure)
.
To connect the switch to a network for out-of-band management, follow instructions in
EX9200 Switch to a Network for Out-of-Band Management
management console or an auxiliary device, follow instructions in
Management Console or an Auxiliary Device
https:/ /tools.juniper.net/svcreg/SRegSerialNum.jsp.
https:/ /www.juniper.net/customers/csc/management/
"Unpacking the EX9200 Switch" on page
"Connecting DC Power to an EX9214 Switch" on page
.
160.
Connect Earth Ground to an EX Series
"Connecting AC Power to an EX9214
179.
Connecting and Configuring an EX9200
. To connect the switch to a Ethernet
Connecting an EX9200 Switch to a
148.
"Mounting an
Connecting an
154