Table of Contents
Advertisement
Controls
Become familiar with all the controls before you start
and operate the machine.
Control Panel
1. Battery-disconnect switch
2. InfoCenter
3. Power-takeoff switch
(PTO)
4. Light switch
Key Switch
The key switch has 2 positions: O
Use the key switch to turn on or shut off the machine;
refer to
Starting the Machine (page 18)
Off the Machine (page
Power-Takeoff Switch (PTO)
Use the power-takeoff switch (PTO) to engage
and disengage mower blades or start and stop
powered attachments; refer to
Mower-Blade-Control Switch (PTO) (page
Motion-Control Levers
Use the motion-control levers to drive the machine
forward, reverse, and turn either direction.
Park Position
Move the motion-control levers outward from the
center to the P
position when exiting the machine
ARK
to engage the electric brake.
Figure 4
5. Key switch
6. Height-of-cut lever
7. Reference bar
8. Motion-control lever
and O
.
N
FF
and
Shutting
18).
Operating the
19).
Always move the motion-control levers to the P
position when you stop the machine or leave it
unattended.
Light Switch
Use the light switch to illuminate and shut off the light.
InfoCenter Display
The InfoCenter LCD display shows information about
your machine, such as the operating status, various
diagnostics, and other information about the machine.
g411343
•
Splash screen: shows the battery charge for a
few seconds after you move the key to the O
position.
•
Charging screen: shows the battery charge
percentage and amperage.
11
Figure 5
Figure 6
Figure 7
ARK
g373611
N
g360791
g360797
Advertisement
Table of Contents
