Table of Contents
Advertisement
Key Switch
The key switch has 2 positions: O
Use the key switch to turn on or shut off the machine;
refer to
Starting the Machine (page 26)
Off the Machine (page
Power-Takeoff Switch (PTO)
Use the power-takeoff switch (PTO) to engage and
disengage mower blades; refer to
Mower Blade-Control Switch (PTO) (page
Motion-Control Levers
Use the motion-control levers to drive the machine
forward, reverse, and turn either direction.
Park Position
Move the motion-control levers outward from the
center to the P
position when exiting the machine
ARK
to engage the electric brake.
Always move the motion-control levers to the P
position when you stop the machine or leave it
unattended.
Light Switch
Use the light switch to illuminate and shut off the light.
and O
.
N
FF
and
Shutting
26).
Operating the
26).
Figure 6
InfoCenter Display
The InfoCenter LCD display shows information about
your machine, such as the operating status, various
diagnostics, and other information about the machine.
•
Splash screen: shows the battery charge for a
few seconds after you move the key to the O
position.
•
Charging screen: shows the battery charge
percentage and amperage.
ARK
•
Main information screens: shows current
machine information while the key is in the O
position. This screen shows the battery-system
charge level and the status of various components.
Press the
Use the – and + buttons to adjust the maximum
traction speed and mower blade speed.
g398314
15
Figure 7
Figure 8
button to cycle through the screens.
Figure 9
Safety-interlock indicators
Figure 10
Operating hours
N
g360791
g360797
N
g396675
g378466
Advertisement
Table of Contents
