Isplclink Evaluation Of "Plc Link" Flag For All Ports; Checking For Program Controlled Mode - Panasonic FP Series Programming Manual

IsPlcLink
This instruction returns the value of the "PLC Link" flag. The "PLC Link" flag is TRUE if the
Description
communication port of the PLC has been set to PLC Link communication mode.
Symbol:
Example

22.3.2 Checking for program controlled mode

Program controlled mode can be checked for the following devices:
FP0:
Port Port Special
name number internal
relay
COM 1 R9032
FP, FP-X:
Port Port Special
name number internal
relay
TOOL 0 R9040
COM1 1 R9032
COM2 2 R9042
FP2/FP2SH/FP10SH:
Port Port Special
name number internal
relay
COM 0 R9032
MCU:
Port name Port number
COM1 16#xx01
COM2 16#xx02
xx = slot number (hexadecimal)
Evaluation of "PLC Link" flag for all ports
Function name
IsProgramControlled (see
page 726)
Function name
IsProgramControlled (see
page 726)
Function name
IsProgramControlled (see
page 726)
Function name
IsProgramControlled (see
page 726)
Data transfer via communication ports
System variable name Bit status
sys_bIsComPort1ProgramC TRUE
ontrolled
System variable name Bit status
sys_bIsToolPortProgramCo FALSE
ntrolled
sys_bIsComPort1ProgramC
ontrolled
sys_bIsComPort2ProgramC
ontrolled
System variable name Bit status
sys_bIsComPort1ProgramC TRUE
ontrolled
DUT
MCU-STATUS_DUT.CommunicationMode
=1 (see page 729)
725