Panasonic FP Series Programming Manual page 1160

HscInfo_IsChannel
Enabled
This instruction returns TRUE if the high-speed counter channel specified by iChannel has been
Description
enabled in the system registers and is supported by the selected PLC type.
See also:
 Tool instructions: overview of high-speed counter instructions
 Required system register settings
see page 1327
PLC types
Data types
Variable
iChannel
Output variable
In this example the function has been programmed in ladder diagram (LD) and structured text (ST).
Example
The same POU header is used for all programming languages.
POU header All input and output variables used for programming this function have been declared in the POU
header.
Body
LD
ST When programming with structured text, enter the following:
if (bChannelEnabled_Check)
bChannelEnabled
end_if;
Checks if high-speed counter channel is enabled
Data type Function
INT High-speed counter channel:

FP : 0, 2
FP-X R: 0, 1
FP-X 16K C14T: 0, 1, 2
FP-X 32K C30T, C60T: 0, 1, 2, 3
FP0R: 0, 1, 2, 3
FP0: 0, 1
FP-e: 0, 1
BOOL TRUE if the channel specified by iChannel is enabled
then
:= HscInfo_IsChannelEnabled(iChannel
High-speed counter instructions
:= iChannel);
1159