Panasonic FP Series Programming Manual page 1213

Pulse output instructions
PulseControl_PulseOutput
Continue
This instruction continues pulse output at the channel specified by iChannel after pulse output has
Description
been stopped using PulseControl_PulseOutputStop (see page 1213). Bit 3 of the pulse output
control code (see page 1021) is set to FALSE.
See also:
 Pulse output tool instructions in the online help
 PulseControl_PulseOutputStop (see page 1213)
 PulseInfo_IsPulseOutputStopped (see page 1228)
To add an enable input and enable output to the instruction, select [With EN/ENO] from the
"Instructions" pane (LD, FBD or IL editor). To reuse an instruction select "Recently used" from the
context menu or press <Ctrl>+<Shift>+<v> in the programming window.
see page 1329
PLC types
Data types
Variable
iChannel
In this example the function has been programmed in ladder diagram (LD) and structured text (ST).
Example
The same POU header is used for all programming languages.
POU header All input and output variables used for programming this function have been declared in the POU
header.
Body
LD
1212
Continues pulse output
Data type Function
INT Pulse output channel:

FP : 0, 2
FP-X R: 0, 1
FP-X 16K C14T: 0, 1, 2
FP-X 32K C30T, C60T: 0, 1, 2, 3
FP0R: 0, 1, 2, 3
FP0: 0, 1
FP-e: 0, 1