Panasonic FP Series Programming Manual page 1021

Pulse output instructions
35.1 Introduction
Control FPWIN Pro offers two concepts for programming with pulse output instructions:
FP instructions

Tool instructions

For users programming for different PLC types of the FP series or users who are tired of setting control code
bits and looking up available channel numbers, the tool instructions offer new and comfortable features. These
include information functions for evaluating status flags and settings, control functions for configuring
high-speed counters and pulse outputs, PLC-independent functions and DUTs, as well as variable channel
numbers. However, the FP instructions may be easier to use for beginners or users familiar with FPWIN GR.
Most of the information, which is accessible via information and control functions, is stored in special internal
relays and special data registers. These relays and registers can also be accessed using PLC-independent
system variables.
To take advantage of the features you prefer, the instructions of both libraries can be mixed.
NOTE
When programming with the tool instructions, be sure to refer to the detailed information
provided via the links to the related F/P instructions.
Main features
Pre version 6.4 support
Use of inline functions
Use of FPWIN GR function names
Less code with constant channel numbers
Control codes
Control functions
Information functions
Variable channel numbers
Universal functions for all PLCs
DUT for common channel configuration for all
PLCs for all pulse output instructions
1020
FP instructions Tool instructions









