Panasonic FP Series Programming Manual page 1158

HscInfo_GetCurrent
Speed
This instruction returns the current speed in Hz of the high-speed counter channel specified by
Description
iChannel.
see page 1327
PLC types
Data types
Input variable
iChannel
dutMemory
Output variable
diCurrentSpeed
In this example the function has been programmed in ladder diagram (LD) and structured text (ST).
Example
The same POU header is used for all programming languages.
POU header All input and output variables used for programming this function have been declared in the POU
header.
Body
LD
ST When programming with structured text, enter the following:
if (bGetCurrentSpeed)
HscInfo_GetCurrentSpeed(iChannel
dutMemory
diCurrentSpeed =>
end_if;
Returns current speed of high-speed counter channel
Data type Function
INT High-speed counter channel:
FP
FP-X R: 0, 1
FP-X 16K C14T: 0, 1, 2
FP-X 32K C30T, C60T: 0, 1, 2, 3
FP0R: 0, 1, 2, 3
FP0: 0, 1
FP-e: 0, 1
DUT (see HscInfo_GetCurrentSpeed_DUT
page 51)
DINT Stores the current speed of the channel specified by iChannel
then
:= Memory_DUT,
diCurrentSpeed);
High-speed counter instructions

: 0, 2
:= iChannel,
1157