Table of Contents
Advertisement
Timer instructions
MUL_TIME_DINT
MUL_TIME_DINT multiplies the values of the input variables and writes the result to the output
Description
variable.
To add an enable input and enable output to the instruction, select [With EN/ENO] from the
"Instructions" pane (LD, FBD or IL editor). To reuse an instruction select "Recently used" from the
context menu or press <Ctrl>+<Shift>+<v> in the programming window.
Availability of MUL_TIME_DINT (see page 1328)
PLC types
Data types
Data type
TIME
DINT
TIME
In this example, the same POU header is used for all programming languages. For an example
Example
using IL (instruction list), please refer to the online help.
POU header
In the POU header, all input and output variables are declared that are used for programming this
function.
In this example, the input variables time_value and multiplier have been declared. However, you
can write a constant directly at the input contact of the function instead.
Body
time_value_1 is multiplied by multiplier. The result is written in time_value_2.
LD
ST
When programming with structured text, enter the following:
time_value_2:=MUL_TIME_DINT(time_value_1, multiplier);
336
Multiply TIME by DOUBLE INTEGER
I/O
Function
1st input
multiplicand
2nd input
multiplicator
output
result
Advertisement
Table of Contents
