Panasonic FP Series Programming Manual page 1215

Pulse output instructions
PulseControl_PulseOutputStop
This instruction stops the pulse output on the channel specified by iChannel by setting bit 3 of the
Description
pulse output control code (see page 1021) to TRUE. Use PulseControl_PulseOutputContinue (see
page 1211) to continue pulse output after the interrupt.
See also:
PulseInfo_IsPulseOutputStopped (see page 1228)

 PulseControl_PulseOutputContinue (see page 1211)
 Stopping pulse output
To add an enable input and enable output to the instruction, select [With EN/ENO] from the
"Instructions" pane (LD, FBD or IL editor). To reuse an instruction select "Recently used" from the
context menu or press <Ctrl>+<Shift>+<v> in the programming window.
see page 1329
PLC types
Data types
Variable
iChannel
In this example the function has been programmed in ladder diagram (LD) and structured text (ST).
Example
The same POU header is used for all programming languages.
POU header All input and output variables used for programming this function have been declared in the POU
header.
Body
LD
ST
1214
Stops pulse output
Data type Function
INT Pulse output channel:

FP : 0, 2
FP-X R: 0, 1
FP-X 16K C14T: 0, 1, 2
FP-X 32K C30T, C60T: 0, 1, 2, 3
FP0R: 0, 1, 2, 3
FP0: 0, 1
FP-e: 0, 1