Panasonic FP Series Programming Manual page 1202

PulseControl_Counting
Enable
This instruction enables counting on the pulse output channel specified by iChannel after counting
Description
has been disabled with PulseControl_CountingDisable (see page 1198). Bit 1 of the pulse output
control code (see page 1021) is set to FALSE.
See also:
 Pulse output tool instructions in the online help
PulseControl_CountingDisable (see page 1198)

 PulseInfo_IsCountingDisabled (see page 1225)
To add an enable input and enable output to the instruction, select [With EN/ENO] from the
"Instructions" pane (LD, FBD or IL editor). To reuse an instruction select "Recently used" from the
context menu or press <Ctrl>+<Shift>+<v> in the programming window.
see page 1329
PLC types
Data types
Variable
iChannel
In this example the function has been programmed in ladder diagram (LD) and structured text (ST).
Example
The same POU header is used for all programming languages.
POU header All input and output variables used for programming this function have been declared in the POU
header.
Body
LD
Enables counting on a pulse output channel
Data type Function
INT Pulse output channel:

FP : 0, 2
FP-X R: 0, 1
FP-X 16K C14T: 0, 1, 2
FP-X 32K C30T, C60T: 0, 1, 2, 3
FP0R: 0, 1, 2, 3
FP0: 0, 1
FP-e: 0, 1
Pulse output instructions
1201