Panasonic FP Series Programming Manual page 1206

PulseControl_Elapsed
ValueContinue
This instruction resumes pulse counting on the channel specified by iChannel after a reset of the
Description
elapsed value using PulseControl_ElapsedValueReset (see page 1206). Bit 0 of the pulse output
control code (see page 1021) is set to FALSE.
See also:
 Pulse output tool instructions in the online help
PulseInfo_IsElapsedValueReset (see page 1226)

 PulseInfo_ReadElapsedValue (see page 1233)
 PulseControl_ElapsedValueContinue (see page 1206)
 PulseControl_WriteElapsedValue (see page 1216)
To add an enable input and enable output to the instruction, select [With EN/ENO] from the
"Instructions" pane (LD, FBD or IL editor). To reuse an instruction select "Recently used" from the
context menu or press <Ctrl>+<Shift>+<v> in the programming window.
see page 1329
PLC types
Data types
Variable
iChannel
In this example the function has been programmed in ladder diagram (LD) and structured text (ST).
Example
The same POU header is used for all programming languages.
POU header All input and output variables used for programming this function have been declared in the POU
header.
Body
LD
Continues pulse counting after reset
Data type Function
INT Pulse output channel:

FP : 0, 2
FP-X R: 0, 1
FP-X 16K C14T: 0, 1, 2
FP-X 32K C30T, C60T: 0, 1, 2, 3
FP0R: 0, 1, 2, 3
FP0: 0, 1
FP-e: 0, 1
Pulse output instructions
1205