Panasonic FP Series Programming Manual page 1153

High-speed counter instructions
HscControl_SetDefaults
This instruction sets all bits of the high-speed counter control code (see page 891) of the channel
Description
specified by iChannel to 0. 0 is the default setting.
To add an enable input and enable output to the instruction, select [With EN/ENO] from the
"Instructions" pane (LD, FBD or IL editor). To reuse an instruction select "Recently used" from the
context menu or press <Ctrl>+<Shift>+<v> in the programming window.
see page 1327
PLC types
Data types
Variable
iChannel
In this example the function has been programmed in ladder diagram (LD) and structured text (ST).
Example
The same POU header is used for all programming languages.
POU header All input and output variables used for programming this function have been declared in the POU
header.
Body When the variable bSetDefaults changes from FALSE to TRUE, all settings of the channel
specified by iChannel are set to their default values.
LD
ST When programming with structured text, enter the following:
if DF(bSetDefaults)
HscControl_SetDefaults(iChannel
end_if;
1152
Sets defaults for high-speed counter channel
Data type Function
INT High-speed counter channel:

FP : 0, 2
FP-X R: 0, 1
FP-X 16K C14T: 0, 1, 2
FP-X 32K C30T, C60T: 0, 1, 2, 3
FP0R: 0, 1, 2, 3
FP0: 0, 1
FP-e: 0, 1
then
:= iChannel);