Panasonic FP Series Programming Manual page 1163

High-speed counter instructions
HscInfo_IsResetInput
Disabled
This instruction returns TRUE if the reset input of the channel specified by iChannel has been
Description
disabled.
See also:
Tool instructions: overview of high-speed counter instructions

 HscControl_ResetInputEnable (see page 1151)
 HscControl_ResetInputDisable (see page 1149)
 FP instructions Enabling/disabling the reset input (hardware reset) (see page
891)
see page 1327
PLC types
Data types
Variable
iChannel
Output variable
In this example the function has been programmed in ladder diagram (LD) and structured text (ST).
Example
The same POU header is used for all programming languages.
POU header All input and output variables used for programming this function have been declared in the POU
header.
Body
LD
ST When programming with structured text, enter the following:
if (bResetInput_Check)
bResetInputDisabled
iChannel);
end_if;
1162
Checks if reset input is disabled
Data type Function
INT High-speed counter channel:

FP : 0, 2
FP-X R: 0, 1
FP-X 16K C14T: 0, 1, 2
FP-X 32K C30T, C60T: 0, 1, 2, 3
FP0R: 0, 1, 2, 3
FP0: 0, 1
FP-e: 0, 1
BOOL TRUE if the reset input of the channel specified by iChannel is
disabled
then
:= HscInfo_IsResetInputDisabled(iChannel :=