Panasonic FP Series Programming Manual page 1143

High-speed counter instructions
HscControl_Counting
Enable
This instruction enables counting on the high-speed counter channel specified by iChannel after
Description
counting has been disabled with HscControl_CountingDisable (see page 1139). Bit 1 of the
high-speed counter control code (see page 891) is set to FALSE.
See also:
 Tool instructions: overview of high-speed counter instructions
 HscControl_CountingDisable (see page 1139)
HscInfo_IsCountingDisabled (see page 1159)

To add an enable input and enable output to the instruction, select [With EN/ENO] from the
"Instructions" pane (LD, FBD or IL editor). To reuse an instruction select "Recently used" from the
context menu or press <Ctrl>+<Shift>+<v> in the programming window.
see page 1327
PLC types
Data types
Variable
iChannel
In this example the function has been programmed in ladder diagram (LD) and structured text (ST).
Example
The same POU header is used for all programming languages.
POU header All input and output variables used for programming this function have been declared in the POU
header.
Body When the variable bEnableCounting changes from FALSE to TRUE, counting on the channel
specified by iChannel is enabled.
LD
1142
Enables counting on a high-speed counter channel
Data type Function
INT High-speed counter channel:

FP : 0, 2
FP-X R: 0, 1
FP-X 16K C14T: 0, 1, 2
FP-X 32K C30T, C60T: 0, 1, 2, 3
FP0R: 0, 1, 2, 3
FP0: 0, 1
FP-e: 0, 1