Panasonic FP Series Programming Manual page 1152

HscControl_ResetInput
Enable
This instruction enables the reset input of the channel specified by iChannel. Bit 2 of the
Description
high-speed counter control code (see page 891) is set to FALSE.
See also:
 Tool instructions: overview of high-speed counter instructions
 HscInfo_IsResetInputDisabled (see page 1161)
To add an enable input and enable output to the instruction, select [With EN/ENO] from the
"Instructions" pane (LD, FBD or IL editor). To reuse an instruction select "Recently used" from the
context menu or press <Ctrl>+<Shift>+<v> in the programming window.
see page 1327
PLC types
Data types
Variable
iChannel
In this example the function has been programmed in ladder diagram (LD) and structured text (ST).
Example
The same POU header is used for all programming languages.
POU header All input and output variables used for programming this function have been declared in the POU
header.
Body When the variable bResetInputEnable changes from FALSE to TRUE, the reset input of the
channel specified by iChannel is enabled.
LD
ST When programming with structured text, enter the following:
if DF(bResetInputEnable)
HscControl_ResetInputEnable(iChannel
end_if;
Enables reset input
Data type Function
INT High-speed counter channel:

FP : 0, 2
FP-X R: 0, 1
FP-X 16K C14T: 0, 1, 2
FP-X 32K C30T, C60T: 0, 1, 2, 3
FP0R: 0, 1, 2, 3
FP0: 0, 1
FP-e: 0, 1
then
High-speed counter instructions
:= iChannel);
1151