Panasonic FP Series Programming Manual page 1200

PulseControl_Counting
Disable
This instruction disables counting on the channel specified by iChannel. Bit 1 of the pulse output
Description
control code (see page 1021) is set to TRUE.
See also:
 Pulse output tool instructions in the online help
 PulseInfo_IsCountingDisabled (see page 1225)
 PulseControl_CountingEnable (see page 1200)
To add an enable input and enable output to the instruction, select [With EN/ENO] from the
"Instructions" pane (LD, FBD or IL editor). To reuse an instruction select "Recently used" from the
context menu or press <Ctrl>+<Shift>+<v> in the programming window.
see page 1329
PLC types
Data types
Variable
iChannel
Output variable
In this example the function has been programmed in ladder diagram (LD) and structured text (ST).
Example
The same POU header is used for all programming languages.
POU header All input and output variables used for programming this function have been declared in the POU
header.
Body
LD
Disables counting on a pulse output channel
Data type Function
INT Pulse output channel:

FP : 0, 2
FP-X R: 0, 1
FP-X 16K C14T: 0, 1, 2
FP-X 32K C30T, C60T: 0, 1, 2, 3
FP0R: 0, 1, 2, 3
FP0: 0, 1
FP-e: 0, 1
BOOL TRUE if pulse counting has been disabled
Pulse output instructions
1199