Table of Contents
Advertisement
Unit_AnalogInput_
FP0_A80
This function block reads data from the input channels of the FP0-A80 unit. The result is stored as
Description
16-bit words in the output variables iInChannel0–iInChannel7. The unit has eight channels and
supports D/A conversion.
REFERENCE
The online help only provides a short overview of DIP switch settings and wiring. For technical
information, please refer to the manual FP0 A/D Converter Unit ARCT1F321 manual on your FPWIN
Pro installation CD.
see see page 1333
PLC types
Analog mode switch setting
Use the DIP switches at the front of the unit to set the analog channels:
Input channels, configured by DIP switches 1 and 2:
1
2
3
4
5
ON
Reads data from the FP0-A80 unit
0 – 5 V,
-10 – +10 V
0 – 20 mA
see note 1
Off
On
Off
On
1
2
3
4
5
-100 – +100 mV
Off
On
Off
On
or
Analog unit instructions
1097
Advertisement
Table of Contents
