Verify Port Media Gateway Address Plugs - Avaya S8700 Installing

118 Installing the Avaya™ S8700 Media Server with Avaya™ MCC1 or SCC1 Media Gateway

Verify Port Media Gateway Address Plugs

The address plug is a jumper field on port media gateways (J58890H) only. The address plug is
located on the far right hand side of the backplane, to the right of slot 00.
A group of six pins is labeled for the media gateway (carrier) jumper connections. Verify that
the address plug for each port carrier is in the correct location for that carrier. See
Gateway Address Plug Location — Rear of Media Gateway'' on page
setting is "B" (callout 2).
Port Media Gateway Address Plug Location — Rear of Media Gateway
Figure notes
1
2
3
4
6
7
Address Plug (shown set to carrier D)
Carrier B Jumper Location (Default)
Carrier C Jumper Location
Right Edge of Backplane
4
1 2
3
add_plug CJL 050906
Right Edge of Media Gateway
5
Backplane Slot 00
6
7 To Connector Panel
May 2003
''Port Media
118. The factory default
5