Verify Port Media Gateway Address Plugs - Avaya S8700 Installing Manual

Verify Port Media Gateway Address Plugs

The address plug is a jumper field on port media gateways (J58890H) only. The address plug is
located on the far right hand side of the backplane, to the right of slot 00.
A group of six pins is labeled for the media gateway (carrier) jumper connections. Verify that
the address plug for each port carrier is in the correct location for that carrier. See
Gateway Address Plug Location — Rear of Media Gateway'' on page
setting is "B" (callout 2).
Port Media Gateway Address Plug Location — Rear of Media Gateway
Figure notes
1 Address Plug (shown set to carrier D)
Carrier B Jumper Location (Default)
2
Carrier C Jumper Location
3
4 Right Edge of Backplane
Installing an Avaya SCC1 Media Gateway Stack
4
6
1
2
7
3
5
6
7
October 2002
121. The factory default
5
add_plug CJL 050906
Right Edge of Media Gateway
Backplane Slot 00
To Connector Panel
121
''Port Media