Cq 14 Registration - Xerox 3001 Service Manual

CQ 14 Registration Probable Cause Corrective Action
Definition
1.
Registration is not adjusted correctly. 1. Perform Registration adjustment (ADJ 8.1).
Misregistration is when the distance from
the lead edge of the image t o the lead
edge of the media is not within
specification.
2. Defective motion sensor (registration will
2.
Replace the motion sensor (PL 8.3).
vary copy t o copy).
3. Defective media feed clutch. 3. Replace the media feed clutch (PL 8.1).
4. Defective upper media feed roll
.
4.
Replace the upper feed roll (REP 8.2).
5.
Incorrect or defective document sensor.
5.
Ensure that the front document sensor is
installed correctly so that, the actuator
actuates
0.040
inch (Imm) above the
maximum height of the document drive
rolls.
6. Operator pushed document too far into 6. Instruct operator on how t o insert the
the document handler. document into the document handler.
1 2/98
CQ 14 Registration
3-44 3001