Rep 8.4 Motion Sensor - Xerox 3001 Service Manual

REP 8.4 MOTION SENSOR
4. REMOVE MEDIA TRANSPORT (REP 8.1). 6.
TURN OVER THE MEDIA TRANSPORT.
PARTS LIST ON PL 8.3
5. (FIGURE 1): PREPARE TO REMOVE
7. (FIGURE
2):
PREPARE TO REMOVE
MOTION SENSOR. MOTION SENSOR.
REMOVAL
1. WARNING: DISCONNECT THE POWER
CORD.
2. REMOVE THE RIGHT AND LEFT SIDE
COVERS, THE UPPER AND LOWER REAR
COVERS, AND THE SEPARATOR GUIDES.
3. REMOVE XEROGRAPHIC MODULE (REP
9.1).
MOVE THE FABRIC GUIDE
-----c:,
REMOVE MEDIA
GUIDE PLATE
REMOVE FUSER
PRESSURE PLATE
URNAROUND
AFFLE BOTH SIDES
RETAINER RING
Figure 2. Prepare to Remove Motion Sensor
Figure 1. Prepare to Remove Motion Sensor
(Continued)
12/98
3001 4-1 7
REP 8.4