Sp6-Xxx (Peripherals) - Ricoh Aficio MP201SPF Service Manual

System Service Mode

SP6-XXX (Peripherals)

ADF Adjustment (
6006* Area")
NOTE: Available menus depend on the machine model and its configuration.
StoS/Front Regist
001
Adjusts the side-to-side registration for the front side of the original, for ARDF
mode. Use the
Leading Regist
002
Adjusts the leading edge registration for ARDF mode. Use the
select "+" or "–" before entering the value.
Trailing Erase
003
Adjusts the trailing edge erase margin for ARDF mode. Use the
select "+" or "–" before entering the value.
S to S/ Rear Regist
004
Adjusts the side-to-side registration for the 2nd side of the original, for ARDF
mode. Use the
Sub-scan Magnif
005
Adjusts the sub-scan magnification for the ARDF.
Origin Curl Adj
006
Turns on or off the skew correction at 2nd side scanning. This SP is activated
only when the duplex mode is selected.
Skew Correction
007
Adjusts the original buckle for the skew correction at 2ns side scanning. This
SP is activated only when SP6-006-006 is set to "1 (Yes)".
D115/D116
"DF Image Adjustment" in the "Adjusting Copy Image
[–5.0 to +5.0 / 0.0 / 0.1 mm/step]
key to select "+" or "–" before entering the value
[–5.0 to +5.0 / 0.0 / 0.1 mm/step]
[–3.0 to +3.0 / –1.5 / 0.1 mm/step]
[–5.0 to +5.0 / 0.0 / 0.1 mm/step]
key to select "+" or "–" before entering the value
[–0.9 to +0.9 / 0.0 / 0.1 %/step]
[0 = No / 1 = Yes]
[–20 to +20 / 0.0 / 1 mm/step]
3-82
key to
key to
SM Appendix