Ricoh Aficio MP201SPF Service Manual page 456

Bit Switches
System Switch 17 - Not used (do not change these settings)
System Switch 18 - Not used (do not change these settings)
System Switch 19 [SP No. 1-101-026]
No FUNCTION
0-6 Not used
Special Original mode
7 0: Disabled
1: Enabled
System Switch 1A - Not used (do not change these settings)
System Switch 1B [SP No. 1-101-028]
In this switch setting, there is a limitation. Do not select the same image quality in two
modes.
e.g) these setting combination is not allowed:
[Bit1: 0, Bit 0: 1 = Text] [Bit3: 0, Bit 2:0 = Photo/ Diffusion]
[Bit 6: 0, Bit 5: 0, Bit 4: 0 = Text]
No. FUNCTION
Image Quality in Text mode
0-1 Bit 1: 0, Bit 0: 0 = Text/ Sharp
Bit 1: 0, Bit 0: 1 = Text
Image Quality in Photo mode
Bit 3: 0, Bit 2: 0 = Photo/
2-3 Diffusion
Bit 3: 0, Bit 2: 1 = Photo/
Dithering
D115/D116
COMMENTS
Do not change the settings.
1: If the customer frequently wishes to transmit a
form or letterhead which has a colored or printed
background, change this bit to "1". "Original 1" and
"Original 2" can be selected in addition to the "Text",
"Text/Photo" and "Photo" modes.
COMMENTS
This setting determines the desirable scanning
image quality when the text mode is selected
with the operation panel.
This setting determines the desirable scanning
image quality when the photo mode is selected
with the operation panel.
5-18 SM Appendix