Service Program
Starting SP Mode
For details, ask your supervisor.
Selecting Programs
When a blinking underscore (or several blinking underscores) is displayed, you can type a
number from the numeric keypad [D].
When the sign "
menu by pressing the left-arrow key [B] or the right-arrow key [C]. To select program, press
the OK key [F].
Specifying Values
1.
After locating a program, press the OK key. A blinking underscore (or several blinking
underscores) indicates which value you can change. The value in parentheses is the
default value of the menu.
2.
Type a necessary value from the numeric keypad. To switch between positive (plus) and
negative (minus) values, press the
3.
To validate the value, press the OK key. To cancel the value, press the escape key [E].
Activating Copy Mode
You can activate the copy mode while the SP mode is running. When you do so, the copier
outputs images or patterns that help you adjust the SP setting.
1.
Press the
key. The copy mode is activated.
2.
Specify copy settings and press the
3.
To return to the SP mode, press the
You cannot end the SP mode while the copy mode is activated.
D115/D116
/OK" [A] is displayed upper right corner, you can scroll through the
key.
key.
5-2
key.
SM