Ricoh Aficio MP201SPF Service Manual page 407

The other end sent RTN or
PIN after receiving a page,
0-08
because there were too
many errors
Non-standard post
0-14 message response code
received
The other terminal is not
0-15 capable of specific
functions.
SM Appendix
Check the line connection.
Replace the NCU or FCU.
The other end may have jammed, or run out of
paper or memory space.
Try adjusting the tx level and/or cable
equalizer settings.
The other end may have a defective
modem/NCU/FCU; try sending to another
machine.
Check for line problems and noise.
Cross reference
Tx level - NCU Parameter 01 (PSTN)
Cable equalizer - G3 Switch 07 (PSTN)
Dedicated Tx parameters in Service Program
Mode
Incompatible or defective remote terminal; try
sending to another machine.
Noisy line: resend.
Try adjusting the tx level and/or cable
equalizer settings.
Replace the NCU or FCU.
Cross reference
See error code 0-08.
The other terminal is not capable of accepting the
following functions, or the other terminal's memory
is full.
Confidential rx
Transfer function
SEP/SUB/PWD/SID
4-3
Fax Error Codes
D115/D116