Dedicated Transmission Parameters; Programming Procedure - Ricoh Aficio MP201SPF Service Manual

5.4 DEDICATED TRANSMISSION PARAMETERS

There are two sets of transmission parameters: Fax and E-mail
Each Quick Dial Key and Speed Dial Code has eight bytes of programmable parameters
allocated to it. If transmissions to a particular machine often experience problems, store that
terminal's fax number as a Quick Dial or Speed Dial, and adjust the parameters allocated to that
number.
The programming procedure will be explained first. Then, the eight bytes will be described.

5.4.1 PROGRAMMING PROCEDURE

1. Set the bit 0 of System Bit Switch 00 to 1.
2. Enter Address Book Management mode ([User Tools]> System Settings> Administrator
Tools > Address Book Management).
3. Select the address book that you want to program.
4. Press the "Dest." Key to enter the fax and e-mail parameter settings.
5. For the fax parameter, select "Fax Settings", for the E-mail parameter, select "E-mail
Settings".
6. Press the "OK" key, and then press "Start" key. Make sure that the LED of the Start button
lights green.
7. The settings for the switch 00 are now displayed. Press the bit number that you wish to
change.
8. To scroll through the parameter switches, either:
9. Select the next switch: press "Next" or Select the previous switch: "Prev." until the correct
switch is displayed. Then go back to step 6.
10. After the setting is changed, press "OK" key.
11. After finishing, reset bit 0 of System Bit Switch 00 to 0.
SM Appendix
Dedicated Transmission Parameters
5-77 D115/D116