Ricoh Aficio MP201SPF Service Manual page 501

Hide thumbs Also See for Aficio MP201SPF:

Table of Contents

5.3 NCU PARAMETERS

The following tables give the RAM addresses and the parameter calculation units that the

machine uses for ringing signal detection and automatic dialing. The factory settings for

each country are also given. Most of these must be changed by RAM read/write (SP2-102),

but some can be changed using NCU Parameter programming (SP2-103); if SP2-103 can

be used, this will be indicated in the Remarks column. The RAM is programmed in hex

code unless (BCD) is included in the Unit column.

Country/Area code for NCU parameters

Use the Hex value to program the country/area code directly into this

address, or use the decimal value to program it using SP2-103-001

South Africa

NCU Parameters

Chapters

Table of Contents

Aficio mp 201f