Ricoh Aficio MP201SPF Service Manual page 323

Outline Phone #
The SP sets the number that switches to PSTN for the outside connection for
embedded RCG-M in a system that employs a PBX (internal line).
If the execution of SP5816-151 has succeeded and embedded RCG-M
has connected to the external line, this SP display is completely blank.
154
If embedded RCG-M has connected to an internal line, then the number
of the connection to the external line is displayed.
If embedded RCG-M has connected to an external line, a comma is
displayed with the number. The comma is inserted for a 2 sec. pause.
The number setting for the external line can be entered manually
(including commas).
Dial Up User
Use this SP to set a user name for access to remote dial up. Follow these
rules when setting a user name:
156
Name length: Up to 32 characters
Spaces and # allowed but the entire entry must be enclosed by double
quotation marks (").
Dial Up Password
Use this SP to set a password for access to remote dial up. Follow these rules
when setting a user name:
157
Name length: Up to 32 characters
Spaces and # allowed but the entire entry must be enclosed by double
quotation marks (").
Phone Number
Use this SP to set the telephone number of the line where embedded RCG-M
161
is connected. This number is transmitted to and used by the Call Center to
return calls.
Limit: 24 numbers (numbers only)
SM Appendix 3-51
System Service Mode
D115/D116