Copier Settings; Fax Settings - Ricoh Aficio MP201SPF Service Manual
D115/d116
Hide thumbs
Also See for Aficio MP201SPF:
- Quick manual (6 pages) ,
- Operating instructions manual (1660 pages) ,
- Quick manual (5 pages)
Table of Contents
Advertisement
Rev. 4/28/2011
Copier settings
1.
Start the SP mode.
2.
Select SP5-801-001 and execute the initialization.
3.
Exit the SP mode, and then start the UP mode.
⇒
4.
Select the "@Remote Service" ("User Tool" > "System Settings > Administrator Tools" >
"Extended Security" > @Remote Service") and select "Do Not Prohibit".
5.
Exit the UP mode, and then start the SP mode.
6.
Select SP5-870-003 and execute initialization for @Remote.
7.
Select SP5-907-001 and specify the "Plug & Play".
8.
Select SP5-870-001 and execute writing certification for @Remote S.
9.
Select SP5-302-002 and specify the time zone.
10. Select SP5-307-001, 003, and 004 and specify the daylight-saving-time settings.
11. Exit the SP mode and turn the main switch off and on.
12. Start the UP mode.
13. Specify the date and time with "Set Date" or "Set Time" (User Tool" > "System Settings" >
"Set Date" or "Set Time").
14. Turn the main switch off and on.
15. Check the operations.
16. Make a full size copy, and check if the side-to-side and leading edge registrations are
correct. If they are not, adjust the registrations.
Fax Settings
Initializing the Fax unit
When you press the Fax key for the first time after installation, the error "SRAM problem
occurred / SRAM was formatted" will show on the LCD for initializing the program of the fax unit.
Turn the main power switch off/on to clear the error display.
If another error occurs after initialization, this can be a functional problem.
1.
Select fax SP1-101-016 and specify the country code.
2.
Select fax SP3-101-001 and specify the service station.
SM
2-11
Copier
D115/D116
Advertisement
Chapters
Table of Contents
Troubleshooting
