Ricoh Aficio MP201SPF Service Manual page 397

Rev. 4/28/2011
⇒
1001 Bit Switch
006 Bit Switch 6
bit 7 Timing of the PJL Status ReadBack (JOB END) when
printing multiple collated copies.
This bitsw determines the timing of the PJL USTATUS JOB END sent when
multiple collated copies are being printed.
0 (default): JOB END is sent by the device to the client after the first copy has
completed printing. This causes the page counter to be incremented after the first
copy and then again at the end of the job.
1: JOB END is sent by the device to the client after the last copy has finished
printing. This causes the page counter to be incremented at the end of each job.
1001 Bit Switch
007 Bit Switch 7 DFU
1001 Bit Switch
008 Bit Switch 8 bit 0~8 DFU
1003 Clear Setting
1004 Print Summary
1005 Display Version
1006 Sample/Locked print
SM Appendix
Not used
Prints the service summary sheet
(An error log is printed in addition to the
configuration page).
Displays the version of the controller firmware.
0: Link with Doc., 1: On
Enables and disables the document server. When
you select "0" the document server is enabled or
disables in accordance with copy service mode
SP5-967. When you select "1" the document
server is enabled regardless of service mode
SP5-967.
3-125
System Service Mode
0 1
0: 1:
Disabled Enable
- -
- -
D115/D116