Ricoh Aficio MP201SPF Service Manual page 396

System Service Mode
bit 2 DFU
bit 3 [PS] PS Criteria
Change the number of PS criterion used by the PS interpreter to
determine whether a job is PS data or not.
Pattern3: includes most PS commands.
Pattern1: A small number of PS tags and headers
bit 4 Increase max number of the stored jobs
to 1000 jobs.
Enabled: Changes the maximum number of jobs that can be stored on the
HDD via Job Type settings to 1000. The default is 100.
bit 5 DFU
bit 6 Method for determining the image
rotation for the edge to bring on
Enabled: The image rotation will be performed as they were in the
specifications of older models for the binding of pages of mixed orientation
jobs. The old models are below:
-PCL-: Pre-04A models
bit 7
Letterhead mode printing
Routes all pages through the duplex unit. If this is disabled, simplex pages
or the last page of an odd-paged duplex job, are not routed through the
duplex unit. This could result in problems with letterhead / pre-printed
pages.
D115/D116
Pattern3
Disable
Disable
Disable
3-124
Rev. 4/28/2011
- -
Pattern1
Enable
(100) (1000)
- -
Enable
Enable
(Duplex)
SM Appendix