Ricoh Aficio MP201SPF Service Manual page 478

Bit Switches
Communication Switch 0D [SP No. 1-104-014]
No FUNCTION
The available memory
threshold, below which ringing
0-7 detection (and therefore
reception into memory) is
disabled
Communication Switch 0E [SP No. 1-104-015]
No FUNCTION
Minimum interval between
0-7
automatic dialing attempts
Communication Switch 0F – Not used (do not change the settings.)
Communication Switch 10 [SP No. 1-104-017]
No FUNCTION
Memory transmission:
Maximum number of dialing
0-7
attempts to the same
destination
D115/D116
COMMENTS
00 to FF (Hex), unit = 4 kbytes
(e.g., 06(H) = 24 kbytes)
One page is about 24 kbytes.
The machine refers to this setting before each fax
reception. If the amount of remaining memory is
below this threshold, the machine cannot receive
any fax messages.
If this setting is kept at 0, the machine will detect
ringing signals and go into receive mode even if
there is no memory available. This will result in
communication failure.
COMMENTS
06 to FF (Hex), unit = 2 s
(e.g., 06(H) = 12 s)
This value is the minimum time that the machine
waits before it dials the next destination.
COMMENTS
01 – FE (Hex) times
5-40 SM Appendix