Ricoh Aficio MP201SPF Service Manual page 491

G3 Switch 0F [SP No. 1-105-016]
No FUNCTION
Alarm when an error occurred
in Phase C or later
0
0: Disabled
1: Enabled
Alarm when the handset is
off-hook at the end of
1 communication
0: Disabled
1: Enabled
2-3 Not used
Sidaa manual calibration
setting
4
0: Off
1: On
5-6 Not used
SM Appendix
COMMENTS
If the customer wants to hear an alarm after each
error communication, change this bit to "1".
If the customer wants to hear an alarm if the
handset is off-hook at the end of fax
communication, change this bit to "1".
Do not change the settings.
1: manually calibrates for communication with a
line, whose current change occurs such as an
optical fiber line.
Do not change the settings.
5-53
Bit Switches
D115/D116