Rev. 04/25/2012
Attach the MKB bracket and harness clamp to the MKB (3 x ).
3.
MKB Bracket
4.
Attach the MKB + bracket to the copier
(2 x ).
5.
Connect one end of the MKB harness to CN3 (13
pins) on the MKB.
6.
Connect the other end of the MKB harness to
CN149 (13 pins) on the BICU.
SM
Harness clamp
MKB
2-45
Key Counter (Card) Interface Type A
3 screws
Screw for grounding line of vendor's
harness (if needed).
CN4 (20 pins) for connection of
vendor's harness.
D115/D116