Ricoh Aficio MP201SPF Service Manual page 352

System Service Mode
Device Setting
The NIC and USB support features are built into the GW controller. Use this
5985
SP to enable and disable these features. In order to use the NIC and USB
functions built into the controller board, these SP codes must be set to "1".
001 On Board NIC
002 On Board USB
SP Print Mode
In the SP mode, press Copy Window to move to the copy screen, select the
5990
paper size, then press Start. Select A4/LT (Sideways) or larger to ensure
that all the information prints. Press SP Window to return to the SP mode,
select the desired print, and press "EXECUTE".
001 All (Data List)
002 SP (Mode Data List)
003 User Program
004 Logging Data
005 Diagnostic Report
006 Non-Default (Prints only SPs set to values other than defaults.)
D115/D116
[0 to 2 / 0 / 1 /step]
0: OFF, 1: ON, 2: ON: Limited
When the "Function limitation" is set, "On board NIC" is
limited only for the @Remote or LDAP/NT authentication.
Other network applications than @Remote or
LDAP/NT authentication are not available when
this SP is set to "2". Even if you can change the
initial settings of those network applications,
settings may not actually work.
[0 or 1 / 0 / 1/step]
0: OFF, 1: ON
SMC Print
3-80 SM Appendix