5. Service Tables
007 NIB Summary
SP6-xxx: Peripherals
Staple Adj
6105
[–3.5~+3.5 / 0.0 / 0.5 mm step]
Adjusts the staple position in the main scan direction when using the two-tray finisher.
Punch Pos Adj
Adjusts the punch hole position.
6113
SP6113 1: 2-hole punches for Japan, North America, Europe, and 4-hole punches for Northern
5
Europe.
SP6113 2: 3-hole punches for North America, and 4-hole punches for Europe.
001 2-Hole
002 3-Hole
SP7-xxx: Data Log
Main M Op Time
Display: 000 0000~999 9999 min
7001
The number of prints and drive time for drum revolutions can be obtained by counting the main
motor revolution time. If the amount of time required for the drum to revolve to print 1 copy
increases, this data combined with the number of copies can be used to analyze problems and
could be useful for future product development.
SC Counter
7401
Displays the total number of service calls that have occurred. Display range: 0000~9999
7403 Latest10SCLog
001 Latest
002 Latest 1
238
NIB (Network Interface Board) Summary
Staple Position Adjustment
[–7.5~+7.5 / 0 / 0.5 mm steps]
[–7.5~+7.5 / 0 / 0.5 mm steps]
Main Motor Operation Time
Total SC Counter
SC History (Latest 10 only)
Displays the most recent service calls successive groups of 10.
Punch Hole Position Adjustment