Ricoh Aficio MP201SPF Service Manual page 157

The diagram shows the paper on the copy tray. Note that the paper is output with
the face down.
SP
SP1-001-001 (All Trays)
SP1-001-002 (By-pass)
SP1-001-003 (Duplex)
5. Adjust the leading edge registration (SP1-001).
6. Measure the distance between the side edge of the image area and the side edge of the
paper [B].
SP
SP1-002-001 (1st tray)
SP1-002-002 (2nd tray)
SP1-002-005 (By-pass)
SP1-002-006 (Duplex)
7. Adjust the side-to-side registration (SP1-002).
8. Specify "0" (zero) in SP5-902-001 after finishing the adjustment procedure.
SM
Specification
0 ± 2 mm
0 ± 2 mm
0 ± 4 mm
Specification
0 ± 2 mm
0 ± 2 mm
0 ± 4 mm
0 ± 4 mm
4-61
Adjusting Copy Image Area
D115/D116