Ricoh Aficio MP201SPF Service Manual page 457

Image Quality in Special
Original mode
Bit 6 Bit 5 Bit 4
0 0
4-6
0 0
0 1
0 1
1 0
1 0
7
Not used
System Switch 1C - Not used (do not change these settings)
System Switch 1D [SP No. 1-101-030]
No FUNCTION
RTI/CSI/CPS code display
0 0: Enable
1: Disable
1 Not used
Destination telephone
2 number display limitation
0: OFF, 1: ON
Operation selection without
PIN code registered
3 0: Transmission interrupted
1: No interrupted
transmission
SM Appendix
This setting determines the desirable scanning
image quality when the special original mode is
selected with the operation panel.
Mode
0 Text
1 Text/ Sharp
0 Photo/ Diffusion
1 Photo/ Dithering
0 Dropout color
1 -
Do not change these settings.
0: RTI, CSI, CPS codes are displayed on the top
line of the LCD panel during communication.
1: Codes are switched off (no display)
Do not change this setting.
When "1" is selected, the destination telephone
number display is limited and redial is disabled.
0: When "0" is selected without PIN code
registration, transmission is interrupted and an alert
message shows on the LCD.
5-19
COMMENTS
Bit Switches
D115/D116