Ricoh Aficio MP201SPF Service Manual page 282

System Service Mode
2994* ID Detect Temp
Adjusts the temperature threshold. The ID sensor signal is not referenced
2994 1 when the fusing temperature is at the specified level or higher while the
copier is recovering or starting up.
T Roller Cleaning
2996*
Cleans or does not clean the transfer roller before each job. Select "1" if the
backside of the paper becomes unclean when output. Note that the copier
2996 1
takes a longer time to output the first copy when you select "1". If you select
"0", the transfer roller is never cleaned.
2998* Main Mag- print
Adjusts the magnification (
2998 1
"Replacement and Adjustment"). The specification is 100 ±1.0%.
D115/D116
[30 to 90 / 30 / 1°C/step]
[0 = No / 1 = Yes]
[–0.5 to +0.5 / 0.0 / 0.1%/step]
"Adjusting Copy Image Area" in the section
3-10 SM Appendix