Ricoh Aficio MP201SPF Service Manual page 406

Fax Error Codes
Code Meaning
Modem training fails even
0-05 G3 shifts down to 2400
bps.
The other terminal did not
0-06
reply to DCS
No post-message
0-07 response from the other
end after a page was sent
D115/D116
Suggested Cause/Action
Mode
Check the line connection.
Try adjusting the tx level and/or cable
equalizer.
Replace the FCU.
Check for line problems.
Cross reference
See error code 0-04.
Check the line connection.
Try adjusting the tx level and/or cable
equalizer settings.
Replace the NCU or FCU.
The other end may be defective or
incompatible; try sending to another machine.
Check for line problems.
Cross reference
See error code 0-04.
Check the line connection.
Replace the NCU or FCU.
The other end may have jammed or run out of
paper.
The other end user may have disconnected
the call.
Check for a bad line.
The other end may be defective; try sending to
another machine.
4-2 SM Appendix