Ricoh Aficio MP201SPF Service Manual page 344

System Service Mode
5857 Debug Log Save
ON/OFF
001
Switches the debug log feature on and off. The debug log cannot be captured
until this feature is switched on.
Target (2: HDD 3: SD)
Selects the destination where the debugging information generated by the
event selected by SP5858 will be stored if an error is generated
002
[2 to 3 /1]
2: HDD
3: SD Card
Save to HDD
005
Specifies the decimal key number of the log to be written to the hard disk.
Save to SD Card
006
Specifies the debug log number for saving to an SD card.
HDD to SD Card Latest
Takes the most recent 4 MB of the log written to the hard disk and copies
them to the SD Card.
009
A unique file name is generated to avoid overwriting existing file names on the
SD Card. Up to 4MB can be copied to an SD Card. 4 MB segments can be
copied one by one to each SD Card.
HDD to SD Any
Takes the log of the specified key from the log on the hard disk and copies it to
the SD Card.
010
A unique file name is generated to avoid overwriting existing file names on the
SD Card. Up to 4 MB can be copied to an SD Card. 4 MB segments can be
copied one by one to each SD Card. This SP does not execute if there is no
log on the HDD with no key specified.
D115/D116
CTL -
0: OFF, 1: ON
3-72 SM Appendix