Input Check (Sp5-803); Conducting Input Check; Input Check Table - Ricoh Aficio MP201SPF Service Manual

3.1.2 INPUT CHECK (SP5-803)

Conducting Input Check

1. Select SP5-803.
2. Select the number (see the table below) corresponding to the component.
3. Select "Execute." The copy mode is activated.
4. The sign "01H" or "00H" is displayed (see the table below).

Input Check Table

Num. Sensor/Switch
001 Safety SW
003 Right Cover SW
006 Upper Relay S
007 Lower Relay S
009 Regist Sensor
010 Exit Sensor
011 Duplex Inverter S
014 By-pass PE S
016 Upper PE S
017 BK-Upper PE S
020 BK-Lower PE S
027 PCU Set Signal
028 BK type
030 Duplex Installed
032 Main M Lock
033 Polygon M Lock
SM Appendix
1h
Open
Open
Paper detected
Paper detected
Paper detected
Paper detected
Paper detected
Paper detected
Paper detected
Paper detected
Paper detected
Installed
*
Installed
Locked
Locked
3-117
System Service Mode
0h
Closed
Closed
Not detected
Not detected
Not detected
Not detected
Not detected
Not detected
Not detected
Not detected
Not detected
Not installed
*
Not installed
Not locked
Not locked
D115/D116