Ricoh Aficio MP201SPF Service Manual page 298

System Service Mode
002 Opt Cnt Type 2
5114 Optional Counter I/F
001 MF Key Card Ext. Japan use
5118 Disable Copying
001 This program disables copying.
5120* Clr For Cut Remove
Specifies the condition to reset the copy job settings when the key counter is
removed.
0: Y = Yes: The settings are cleared when the counter is removed.
1: StdBy = Standby only: The settings are cleared when the counter is
5120 1
removed at the end of a job.
2: N = No: The settings are not cleared under either condition.
As for duplex copying, the job settings are always preserved regardless of
these setting.
5121* Counter Up Timing
Selects the count-up timing.
5121 1 0 = Feed: At each paper feed
1= Exit: At each paper exit
D115/D116
12: Exp. Key card (Deduct)
This program specifies the external counter
type.
0: None
CTL
1: Expansion Device type 1
2: Expansion Device type 2
3: Expansion Device type 3
[0: Not installed/ 1: Installed (scanning
CTL
accounting)]
CTL [0: Not disabled/ 1: Disabled]
[0=Yes / 1=Standby only / 2=No]
[0 = Feed In / 1 = Exit]
3-26 SM Appendix