Ricoh Aficio MP201SPF Service Manual page 472

Bit Switches
Printer Switch 08 - Not used (do not change the settings) [SP No. 1-103-009]
Printer Switch 09 - Not used (do not change the settings) [SP No. 1-103-010]
Printer Switch 0A - Not used (do not change the settings) [SP No. 1-103-011]
Printer Switch 0B - Not used (do not change the settings) [SP No. 1-103-012]
Printer Switch 0C - Not used (do not change the settings) [SP No. 1-103-013]
Printer Switch 0D - Not used (do not change the settings) [SP No. 1-103-014]
Printer Switch 0E [SP No. 1-103-015]
No FUNCTION
Paper size selection priority
0 0: Width
1: Length
Paper size selected for printing A4
width fax data
1
0: 8.5" x 11" size
1: A4 size
Page separation
2 0: Enabled
1: Disabled
Printing the sample image on
reports
3-4 Bit 4: 0, Bit 3: 0 = The upper half
only
Bit 4: 0, Bit 3: 1 = 50% reduction in
D115/D116
COMMENTS
0: A paper size that has the same width as
the received data is selected first.
1: A paper size which has enough length to
print all the received lines without reduction
is selected first.
This switch determines which paper size is
selected for printing A4 width fax data, when
the machine has both A4 and 8.5" x 11" size
paper.
1: If all paper sizes in the machine require
page separation to print a received fax
message, the machine does not print the
message (Substitute Reception is used).
After a larger size of paper is set in a
cassette, the machine automatically prints
the fax message.
"Same size" means the sample image is
printed at 100%, even if page separation
occurs.
User Parameter Switch 19 (13H) bit 4 must
be set to "0" to enable this switch.
5-34 SM Appendix