Working with reports
19.7 Computer data sheet
19.6
Configurable symbols
Adapting the symbols on a Function diagram is now possible. The following can be customized:
● Sequence of the connections
● Designation of the connections
● Position of the connections
● Block name
● Icon
Logic blocks are allocated automatically to the runtime group.
All the functions of the CM are also displayed here.
The relationship between the CM and the functions is based on the input connections.
If the space at the margins is not sufficient to display the input or output signals, an overflow
page is created automatically. A grayed out full display of the blocks on the chart with the
signals of the marginal circuits that did not fit onto the first page is displayed on this overflow
page.
19.7
Computer data sheet
Requirement
● The "Locations" tab is selected in the Navigator.
● A workstation has been created.
Benefits
Create the computer data sheet beneath the workstation. The data sheet gives an overview of
the configuration of the workstation. Information on the following topics is evaluated:
● Procurement
● Installation
● Hardware
● Other settings
● Software
● Licenses
Configuration
The computer data sheet evaluates the tabs "Attribute > Computer Information" and "Attribute
> software" of the workstation. The information on the licenses is taken from the "Licenses"
folder, which is parallel to the workstation in the Navigator.
192
Plant Automation Accelerator 3.0
Operating Manual, 04/2019, A5E46351208-AA