Siemens SIMATIC PCS 7 Operating Manual page 127

User needs to fill the following details for ET 200 stations:
General
I/O configu‐
ration
Result
The configured I/O modules are created under the selected target object.
Creating bundles while creating ET 200M station
You can generate bundle information while creating ET 200M station via the HW configuration
tool in order to help procurement team to generate bill of materials (BOM) with correct article
number.
See also chapter Bill of materials (Page 189).
Procedure
1. Double-click on the ET 200M station and navigate to "Attributes > Order data" to see the
bundle article number in the "Article number" field and the bundle description in the
"Comment" field.
2. Double-click on the bundle components and navigate to "Attributes > Order data > Article
number" to see the "Article number" of the corresponding component in the bundle.
3. Double-click on the ET 200M station and navigate to "Attributes > Bundle detection" to see
the article numbers of all the components in the bundle.
4. Right-click on the cabinet and select "New > Bill of material - with bundles" to generate the
bill of materials.
You can select with or without bundles.
Plant Automation Accelerator 3.0
Operating Manual, 04/2019, A5E46351208-AA
ET 200M
Target ob‐ Required
ject
Rack Required
Power Required
supply
Interface Required
module
Front plug Required
Bus adapt‐ Not applica‐
er ble
I/O Mod‐ Required
ules (Any
one)
14.9 Hardware engineering with the configuration tool
ET 200iSP ET 200PA
SMART
Required Required
Required Required
Required Required
Required Required
Not applica‐ Not applica‐
ble ble
Not applica‐ Not applica‐
ble ble
Required Required
Engineering in PAA
ET 200SP ET 200SP
HA
Required Required
Required Required
Not applica‐ Not applica‐
ble ble
Required Required
Not applica‐ Not applica‐
ble ble
Required Required in
case of PRO‐
FINET IM
Required Required
127