Siemens SIMATIC PCS 7 Operating Manual page 85

Prerequisites
● Single or redundant S7 400 AS stations need to be created in the PAA project. AS names
and subnet/subnet B names should be as mentioned in excel file.
Note
For redundant stations, a Subnet B must also be configured.
Note
Importing bundle information of ET 200M
The bundle information generated while creating ET 200M station can be imported. See
also section
stations using HW configuration tool (Page 124).
Importing single ET 200 slave
1. Open the "Excel import" plugin.
2. Map the properties of the HW object in the "Column mapping" tree as per the table below:
3. Click "Import".
Importing single ET 200 slave (1 subnet) with redundant slots
Map the properties of the HW object in the "Column mapping" tree as per the table below:
Station
- Name
A1
Importing single ET 200 slave (1 subnet), 2 redundant slots on 2 IO stations
Map the properties of the HW object in the "Column mapping" tree as per the table below:
Station
- Name
A1
Plant Automation Accelerator 3.0
Operating Manual, 04/2019, A5E46351208-AA
Creating bundles while creating ET 200M station in chapter Configuring ET 200
Station Subnet Subnet B
- Name - Name - Name
A1 PROFI‐
BUS_1
Subnet Subnet B
- Name - Name
PROFI‐
BUS_1
Subnet Subnet B
- Name - Name
PROFI‐
BUS_1
Slave Slave (re‐
dundant)-
- Address
address
3
Slave Slave (re‐
dundant) -
- Address
address
3
Slave Slave (re‐
dundant) -
- Address
Address
3 13
Excel import plugin
13.8 Importing hardware (HW)
IO module IO module
(redun‐
- Slot
dant)
- Slot
4
IO module IO module
(redun‐
- Slot
dant)
- Slot
4 5
IO module IO module
(redun‐
- Slot
dant)
- Slot
4 5
Channel
- Number
0
Channel
- Number
0
Channel
- Number
0
85