Siemens SIMATIC PCS 7 Operating Manual page 86

Excel import plugin
13.8 Importing hardware (HW)
Importing redundant ET 200 slave (2 subnets) on 1 IO station
Map the properties of the HW object in the "Column mapping" tree as per the table below:
Station
- Name
A1
Importing redundant ET 200 slave (2 subnets), 2 redundant slots on 1 IO station
Map the properties of the HW object in the "Column mapping" tree as per the table below:
Station
- Name
A1
Importing redundant ET 200 slave (2 subnets), 2 redundant slots on 2 IO stations
Map the properties of the HW object in the "Column mapping" tree as per the table below:
Station
- Name
A1
Note
There are some mandatory properties to be mapped for the HW, as listed below:
● Slave
– MLFB
– Address
● Slave (redundant)
– Address
● IO module
– MLFB
– Slot
● IO module (redundant)
– Slot
86
Subnet Subnet B
- Name - Name
PROFI‐ PROFI‐
BUS_1 BUS_2
Subnet Subnet B
- Name - Name
PROFI‐ PROFI‐
BUS_1 BUS_2
Subnet Subnet B
- Name - Name
PROFI‐ PROFI‐
BUS_1 BUS_2
Slave Slave (re‐
dundant) -
- Address
address
3
Slave Slave (re‐
dundant)-
- Address
address
3
Slave Slave (re‐
dundant) -
- Address
address
3 13
Operating Manual, 04/2019, A5E46351208-AA
IO module IO module
(redun‐
- Slot
dant)
- Slot
4
IO module IO module
(redun‐
- Slot
dant)
- Slot
4 5
IO module IO module
(redun‐
- Slot
dant)
- Slot
4 5
Plant Automation Accelerator 3.0
Channel
- Number
0
Channel
- Number
0
Channel
- Number
0