14.9.4
Configuring WS Bundle using HW configuration tool
Procedure
The HW configuration tool is used to configure the WS Bundle and described as below:
1. In the menu bar, select the "Plugins > Automation > PCS 7 interface > "HW configuration
tool" command or click the icon on the toolbar.
The "HW configuration tool" plugin opens.
2. Select the "WS Bundle" tab.
3. Drag&drop the target object from the Navigator to the "Target Object" field in the "Set
location as owner" area.
4. Select the "Industrial PC" and the "Quantity" in the "Select configuration" area.
Plant Automation Accelerator 3.0
Operating Manual, 04/2019, A5E46351208-AA
14.9 Hardware engineering with the configuration tool
Engineering in PAA
129